Brass Angle Rotalock Valve with Mounting Bracket for Liquid Receivers

Brass Angle Rotalock Valve with Mounting Bracket for Liquid Receivers - 图片 2

Brass Angle Rotalock Valve with Mounting Bracket for Liquid Receivers

Angle-type brass Rotalock valve with an integral mounting bracket, designed for liquid receiver outlets and compressor service points in commercial refrigeration. Two SAE flare side ports and a top 1/4″ service port with protective cap make installation and charging straightforward. Working pressure 3.0 MPa, hydraulic test 4.5 MPa, 100% leak tested; compatible with R22, R134a, R404A, R407C and R410A.

Brass Angle Rotalock Valve with Mounting Bracket for Liquid Receivers

This angle-type Rotalock valve is designed for direct mounting on liquid receiver outlets and compressor service lines. The integral steel mounting bracket lets you bolt the valve in place without extra support, while the machined Rotalock thread connects to the vessel quickly and without brazing. Two SAE flare side ports and a top 1/4″ service port with protective cap cover shut-off, charging and pressure testing in one compact body. The replaceable PTFE seal provides leak-tight performance after repeated operation; every valve is 100% leak tested before packing.

Key Features:

Forged brass body, 90° angle design with mounting bracket
Two SAE flare side connections, 1/4″–7/8″ range
1/4″ SAE top service port with protective cap
PTFE seal, back-seating spindle, replaceable O-ring
No brazing on site; fast installation and service

Specifications:

Parameter	Value
Type	Angle (90°), receiver/service valve with mounting bracket
Side connections	SAE flare, 1/4″ – 7/8″
Service port	1/4″ SAE with protective cap
Mounting	Integral bracket, bolt-fixed
Body material	Forged brass
Working pressure	3.0 MPa (30 bar)
Hydraulic test pressure	4.5 MPa
Working temperature	-40°C ~ +120°C (typical)
Suitable media	R22, R134a, R404A, R407C, R410A, R507 + refrigeration oils

Applications:

Liquid receiver outlets, compressor suction/discharge lines, filter driers, accumulators, condensing units, cold rooms, truck and marine refrigeration.

Ordering:

MOQ negotiable; lead time 10–25 days; OEM/ODM with custom marking and packaging; samples available.